All Stainless Steel Pressure Gauge with Electrical Contact (Micro-switch Type) MSPS
MSPS contact adopts micro switch, it has better indicate accuracy, set point accuracy, and repeatability error than other contact pressure gauge. It is suitable for all kinds of pressure measurement, alarm system, industrial special oil production line.
MDB-DPDB-SUS pressure gauge adopts dual Bourdon tubes as pressure sensor with dual pointers design. With its single or dual scales, MDB-DPDB-SUS can display readings from two different pressure sources at the same time.
All Stainless Steel Differential Pressure Gauge (Diaphragm Type) MDD
MDD has high pressure resistance and high anticorrosive performance. The diaphragm type pressure gauge is mainly use for the positive and negative pressure port of the filter. It is suitable for measuring differential pressure of liquid level, pump inlet and outlet, oil pipeline, pipeline gas and pressurize pump station.
MDI-SDDB differential pressure gauge measuring principle adopts single diaphragm and dual bellows. MDI-SDDB is suitable for same or different pressure sources measurement in non-crystallized and nonsolidified liquid, gas and steam that compatible with connection’s material.
ECI-LP pressure gauge with inductive switch adopts diaphragm as measuring elements, which is suitable for micro pressure measurement. When pressure increase/decrease to set point, the contact will makes/breaks to control and alarm the connected facility.
■ OEM service
■ Strict overpressure and fatigue test
■ High frequency vibration - to eliminate residual stress in Bourdon tube
■ Specially design for destiny control
■ Gold plating contact - better conductivity and chemical stability
Bimetal Thermometer with Electrical contact (Adjustable Angle Type) BTAC
BTAC adjustable angle type thermometer with sliding contact SPST is used to control the facility connected to the thermometer. BTAC has wide temperature measuring range (-50 to 600℃), the stem length and outer diameter can be customized upon request, which makes it suitable for various industrial application.
Bimetal Thermometer with Electrical Contact (Bottom Mount Type) BTIC
BTIC back mount type thermometer with sliding contact SPST is used to control the facility connected to the thermometer. BTIC has wide temperature measuring range (-50 to 600℃), the stem length and outer diameter can be customized upon request, which makes it suitable for various industrial application.